Duplex 2205 is a stainless steel plate that has chromium, molybdenum and nickel nitrogen in its chemical composition.The Duplex 2205 Plate has yield strength about twice that of austenitic ss and standard thickness ranging between 3/16" to 6".The material is light weight and cost effective.The UNS S32205 Plate comes with high resistance to local, generalized and stress corrosion.
They are also known for their high strength, impact resistance along with low thermal expansion and high thermal conductive properties.The Ss Duplex 2205 Plate is often used in chemical processing, storage and transportation of fluid and gas.They are widely found in equipment for oil and gas exploration industry due to their higher strength.
The properties of duplex 2205 steel plate will include:
Duplex 2205 steel plate
Duplex 2205 stainless steel sheet
SAF 2205 strip
2205 plate material has higher strength and is more prone to corrosion resistance than 316 grade.2205 also has more weldability and it does not need any preheating prior to the welding process.This can save time and cost.However, whether 2205 is superior to 316 grade will depend on the application and environment where you are going to use it.Both have their unique advantages when compared side by side.
Thickness | Width | Length |
---|---|---|
5 to 50 mm | 1500 to 3000 mm | upto 12000 mm |
Specification | Cutting | Application |
ASTM A240 | ASME SA240 | laser, plasma, waterjet | heat exchanger, dished end |
Duplex steel 2205 foil
Werkstoff nr.1.4462 coil
UNS S32205 shim sheet
Material | Hardness (HB) MAX | Yield Strength 0.2% ksi (min) |
Elongation % | Tensile Strength ksi (min) |
---|---|---|---|---|
Duplex | 217 | 65 | 25 | 90 |
STANDARD | UNS | WNR |
---|---|---|
Duplex | UNS S31803 / UNS S32205 | 1.4462 / 1.4462 |
Mn | N | C | S | Si | P | Cr | Mo | Ni | |
---|---|---|---|---|---|---|---|---|---|
2205 (S32205) |
2.0 max |
min: 0.14 max: 0.20 |
0.03 max |
0.02 max |
1.0 max |
0.03 max |
min: 22.0 max: 23.0 |
min: 3.0 max: 3.5 |
min: 4.5 max: 6.5 |
2205 (S31803) |
2.0 max |
min: 0.08 max: 0.20 |
0.03 max |
0.02 max |
1.0 max |
0.03 max |
min: 21.0 max: 23.0 |
min: 2.5 max: 3.5 |
min: 4.5 max: 6.5 |
They come in different dimensions but the standard duplex 2205 plate thickness ranges between 3/16" and 6".
The duplex 2205 sheet cost can vary with the suppliers depending on their pricing strategies.The prices are also dependent on the size and thickness of the plate along with market conditions, demand and availability.If you want a competitive pricing quote for 2205 stainless steel sheets, contact Regent Steel & Engineering Co.
They are a reputed supplier who will let you know the exact pricing of the sheet at a given time, depending on your specific requirements.
Things to consider before purchasing the saf 2205 plate are:
Tolerance over and under nominal thicknesst(mm) | ||||||||||
---|---|---|---|---|---|---|---|---|---|---|
Widthw(mm) | 8.0
|
4.5
|
2.5
|
6.0
|
12.5
|
10.0
|
20.0
|
16.0
|
30
|
25.0
|
2700< w <3000 | 1.0 | 0.80 | 0.90 | 1.0 | 1.0 | 1.3 | 1.1 | 1.8 | 1.4 | |
1200< w <1500 | 0.35 | 0.25 | 0.20 | 0.30 | 0.80 | 0.38 | 0.90 | 0.80 | 1.4 | 1.0 |
w < 1200 | 0.32 | 0.23 | 0.20 | 0.30 | 0.80 | 0.35 | 0.80 | 0.80 | 1.4 | 1.0 |
1500< w <1800 | 0.38 | 0.28 | 0.20 | 0.32 | 0.80 | 0.40 | 0.90 | 0.80 | 1.5 | 1.1 |
2100< w <2400 | 0.80 | 0.80 | 0.80 | 0.80 | 0.80 | 1.0 | 0.90 | 1.5 | 1.1 | |
1800< w <2100 | 0.40 | 0.30 | 0.20 | 0.36 | 0.80 | 0.45 | 0.90 | 0.80 | 1.5 | 1.1 |
2400< w <2700 | 0.80 | 0.80 | 0.80 | 0.90 | 0.80 | 1.1 | 1.0 | 1.7 | 1.3 |
SIZE in MM | SIZE in Inch |
---|---|
3.40mm | .134" |
3.18mm | .125" |
4.75mm | .187" |
3.96mm | .156" |
7.92mm | .312" |
63.5mm | 2.500" |
6.35mm | .250" |
12.7mm | .500" |
9.53mm | .375" |
15.9mm | .625" |
22.2mm | .875" |
19.1mm | .750" |
25.4mm | 1" |
31.8mm | 1.250" |
28.6mm | 1.125" |
44.5mm | 1.750" |
38.1mm | 1.500" |
50.8mm | 2" |
76.2mm | 3" |