Hastelloy C276 pipe fittings

  • Home
  • Hastelloy C276 pipe fittings
Hastelloy C276 pipe fittings
What is the operating temperature range for Hastelloy C276 pipe fittings?

Alloy C-276 can operate in oxidizing conditions up to 1038 °C.However, they might not perform well in strongly oxidizing environments like hot concentrated nitric acid due to insufficient chromium content.

The hastelloy c276 pipe fittings can be used in high temperature conditions as they have a higher melting range of 1325-1370 °C.The material is able to retain its strength and mechanical properties in high temperature conditions.

Table of content

We are one of India's largest and best-quality hastelloy C276 buttweld fittings manufacturer, review factors should consider when choosing a manufacturer

What factors should I consider when choosing a manufacturer of Hastelloy c276 fittings?
  • The hastelloy c276 fittings manufacturer should maintain quality and provide you with relevant certifications.They must be compliant with the relevant industry standards.
  • Choose an experienced manufacturer who has a good reputation in the industry, like Regent Steel & Engineering Co.
  • They should offer customized hastelloy c276 pipe cross and other fittings as per specific application requirements.
  • Assess the manufacturer's inventory and their delivery process should be streamlined to reduce the lead time.
  • The manufacturers must offer ASME SB366 nickel c276 pipe bends at competitive rates and maintain cost transparency throughout the process.

Why spend more when alloy c276 elbow and tee is available here in the precise size?know What should I do if the product don't meet the necessary criteria ?

Hastelloy c276 buttweld fittings

Hastelloy c276 buttweld fittings

Alloy c276 elbow

Alloy c276 elbow

ASTM B366 UNS n10276 tee

ASTM B366 UNS n10276 tee

What should I do if the alloy c276 elbow don't meet the necessary criteria?
  • Document the detailed issue associated with alloy c276 elbow and describe why it does not meet the necessary criteria.
  • Contact the manufacturer and provide them with the documented evidence.Also, convey your expectations and the criteria that the elbows must meet.
  • Request a refund or replacement, as necessary.You should work with the elbow supplier to address any quality concerns.
  • If they are unable to meet your requirements, contact another reputed C276 elbow supplier.
  • Before taking delivery, conduct thorough inspections and get test reports to ensure compliance with future orders.

As supplier and stockist we offer ASTM B366 hastelloy c276 fittings in sizes ranging from 1/2′′ to 10′′ (seamless) and 1/2′′ to 48′′ (welded) for Oil & Gas , see specification chart

Hastelloy c276 pipe fittings specification
hastelloy c276 pipe fittings specification

Thickness Size Standard
Sch 10 to Sch XXS Seamless: 1/2 to 10"
Welded: 1/2 to 48"		 ASME/ ANSI B16.9, ASME B16.28
Process Radius Type
Seamless/ Welded/ Fabricated 1D to 10D or custom Elbow, Tee, Reducer, Cap, Stub End
Specification Surface Application
ASTM B366 | ASME SB366 Sand rolling, sand blasting Flue gas desulfurization systems.
If you need any assistance with ASTM SB366 UNS N10276 reducer and stub end requirements to complete your project in Mumbai, please contact us, check other types here
What are different types of hastelloy c276 fittings ?
Nickel alloy c276 reducer

Nickel alloy c276 reducer

  • 2D, 1D
  • 5D, 3D, 6D
  • 10D, 8D
DIN 2.4819 stub end

DIN 2.4819 stub end

  • Seamless: 1/2 to 10 inch
  • Welded: 1/2 to 48 inch
  • ASTM B366| ASME SB366
Hastelloy alloy c276 pipe bend

Hastelloy alloy c276 pipe bend

  • MSS-SP-43
  • ASME B16.28
  • ASME/ ANSI B16.9
we provide DIN 2.4819 seamless and welded fittings as per ANSI/ASME B16.9 with value-added services together at a competitive price , learn more about technical properties
Hastelloy C276 buttweld fittings chemical properties
Grade Mo C Mn Si Co P S Fe Ni Cr
Hastelloy c276 15.00 – 17.00 0.010 max 1.00 max 0.08 max 2.50 max 0.04 max 0.03 max 4.00 – 7.00 50.99 min* 14.50 – 16.50
Alloy c276 elbow mechanical properties
Material Hardness Rb Yield Strength (Min) Elongation % C276 filler wire ultimate tensile (min)
Mpa Ksi Mpa Ksi
Hastelloy c276 89 347 50.3 67 741 107.4
Hastelloy c276 86 376 54.6 60 796 115.5
UNS N10276 tee equivalent
STANDARD UNS WERKSTOFF NR. JIS EN GOST OR
Hastelloy c276 N10276 2.4819 NW 0276 NiMo16Cr15W ХН65МВУ ЭП760
How can I make sure the Hastelloy C276 buttweld fittings are put properly?
  • To ensure the hastelloy C276 buttweld fittings are put properly, you should select qualified and experienced professionals.
  • Review the guidelines set by the manufacturer with reference to the installation process.
  • Inspect the fittings prior to the installation to ensure there are no defects.
  • Use the correct welding technique and filler material for hastelloy alloy c276 stub end and make sure to control the heat input.
  • Once the welding is done, conduct a thorough visual inspection to check for signs of defects or damages.
How long does it take to get UNS N10276 tee?

The lead time for ASTM B366 UNS N10276 tee can vary with the supplier, product specifications and quantity ordered.Customized and bulk orders may take longer.You can get the delivery timelines when you contact Regent Steel & Engineering Co.

We will openly communicate with you about the deadlines and ensure the order is fulfilled on time.In case of any unforeseen delays, like shipping or production issues, we will let you know about that beforehand.

What are some typical uses for nickel alloy c276 reducer?

The nickel alloy c276 concentric reducer allows for a change in the sizes of the pipes to meet flow requirements.C276 is known for its corrosion resistance, durability and reliability.

Hence, the DIN 2.4819 eccentric reducer is used for various applications in industries like chemical processing, petrochemicals, waste treatment, power generation, etc.

ASME SB366 Nickel alloy c276 elbow weight chart
APPROXIMATES WEIGHTS
Nominal Pipe Size 90°LR ELBOW 45°LR ELBOW 90°SR ELBOW
80S 10S 5S 40S 80S 10S 5S 40S 80S 10S 5S 40S
3/4 0.110 0.060 0.062 0.075 0.090 0.030 0.031 0.037 – – – –
1/2 0.110 0.060 0.049 0.075 0.090 0.030 0.024 0.038 – – – –
1 0.230 0.140 0.078 0.160 0.140 0.100 0.039 0.120 0.180 0.094 0.077 0.118
11/2 0.500 0.280 0.170 0.350 0.310 0.180 0.085 0.200 0.340 0.189 0.114 0.245
12 72.00 25.90 22.30 56.20 38.00 12.50 11.10 28.10 47.17 16.70 14.80 37.50
11/4 0.400 0.240 0.125 0.260 0.230 0.140 0.063 0.170 0.280 0.152 0.101 0.204
2 1.000 0.460 0.286 0.660 0.540 0.310 0.143 0.400 0.680 0.318 0.191 0.434
3 3.000 1.200 0.810 2.150 1.600 0.650 0.405 1.100 1.900 0.761 0.540 1.360
31/2 3.800 1.530 1.080 2.820 2.000 0.760 0.540 1.410 2.700 1.020 0.719 1.880
4 6.100 2.000 1.390 4.000 2.800 1.050 0.696 1.950 3.800 1.310 0.928 2.560
21/2 1.800 0.800 0.576 1.300 0.960 0.450 0.288 0.700 1.300 0.541 0.383 0.909
5 10.00 3.420 2.830 6.480 4.800 1.710 1.420 3.240 6.300 2.280 1.890 4.320
8 32.00 10.00 7.060 20.10 15.80 5.010 3.530 10.10 21.55 6.680 4.710 13.40
6 15.80 5.250 4.030 9.940 7.900 2.430 2.010 4.970 10.40 3.240 2.680 6.630
10 48.00 15.50 13.20 35.40 23.90 7.770 6.620 17.70 31.75 10.40 8.830 23.60
Dimensions of Hastelloy alloy c276 fittings
NOMINAL PIPE SIZE ALL FITTINGS ELBOWS AND TEES 180 DEG RETURN BENDS ALL FITTINGS REDUCERS 180 DEG RETURN BENDS CAPS
NPS OD at Bevel (1), (2) Centre -to- End Dimension A, B, C, M Alignment of Ends U ID at End
(1), (3), (4)		 Overall Length H Centre-to- Centre O Overall Length E
3 to 3 ½ 0.006 0.006 0.003 0.006 0.006 0.025 0.012
½ to 2½ 0.006
-0.003		 0.006 0.003 0.003 0.006 0.025 0.012
26 to 30 0.025
-0.019		 0.012 … 0.019 0.019 … 0.038
5 to 8 0.009
-0.006		 0.006 0.003 0.006 0.006 0.025 0.025
4 0.006 0.006 0.003 0.006 0.006 0.025 0.012
20 to 24 0.025
-0.019		 0.009 0.006 0.019 0.009 0.038 0.025
10 to 18 0.016
-0.012		 0.009 0.006 0.012 0.009 0.038 0.025
32 to 48 0.025
-0.019		 0.019 … 0.019 0.019 …

Hastelloy C276 Products

Check Our Product Range
close

© 2023 - Regent Steel & Engg.Co.

Baidu
map